站長手扎~SayCoo!

Web Server Optimization Guide

1. Basic Config File Editing
Make a backup of your /etc/my.cnf file, and then perform the following via SSH:
pico /etc/my.cnf
Add in the following entries or replace the current existing ones:
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
skip-innodb
query_cache_limit=8M
query_cache_size=256M
query_cache_type=1
max_connections=500
max_user_connections=10
interactive_timeout=20
wait_timeout=20
connect_timeout=6
thread_cache_size=128
key_buffer=16M
join_buffer=1M
max_allowed_packet=16M
table_cache=1024
record_buffer=1M
sort_buffer_size=2M
read_buffer_size=2M
max_connect_errors=10
# Try number of CPU’s*2 for thread_concurrency
thread_concurrency=4
myisam_sort_buffer_size=64M
#log-bin
server-id=1
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/lib/mysql/mysql.pid
open_files_limit=8192
[mysqldump]
quick
max_allowed_packet=16M
[mysql]
no-auto-rehash
#safe-updates
[isamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
[myisamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
Hit CTRL + X to exit and save the file
Now to edit the httpd.conf:
pico /usr/local/apache/conf/httpd.conf (or wherever your httpd.conf is located)
Set “Timeout” value to “Timeout 300”
Change “KeepAlive on” to “KeepAlive off”
Set “MinSpareServers” to “MinSpareServers 8”
Set “MaxSpareServers” to “MaxSpareServers 13”
Set “MaxRequestsPerChild” to “MaxRequestsPerChild 50”
Set “HostnameLookups” to “HostnameLookups Off”
CTRL + X to exit and save the file
Restart Apache and MySQL with:
service httpd restart
service mysql restart OR service mysqld restart
Some people may need to restart the services with /etc/rc.d/init.d/httpd restart and /etc/rc.d/init.d/mysql restart
The above changes can be altered and played around with to suit your server’s needs (i.e. if your server is fast or not).
2. Installing Mod_Perl
Mod_Perl description: “mod_perl gives you a persistent Perl interpreter embedded in your web server. This lets you avoid the overhead of starting an external interpreter and avoids the penalty of Perl start-up time, giving you super-fast dynamic content. ”
Run these commands via SSH:
wget http://perl.apache.org/dist/mod_perl-1.0-current.tar.gz
tar zxvf tar zxvf mod_perl-1.0-current.tar.gz
cd mod_perl-1.29 (or whatever folder is generated)
perl Makefile.PL
If you see any errors about missing dependencies (such as CGI.pm, LWP::UserAgent & HTML::HeadParser required by mod_perl) you may install them with:
perl -MCPAN -e shell
install HTML::HeadParser
If you had to install any dependencies you must re-run “perl Makefile.PL”. Back to setting up mod_perl, after perl Makefile.PL run:
make
make install
Congratulations, you’ve just installed mod_perl. Restart Apache with:
service httpd restart
OR
/etc/rc.d/init.d/httpd restart
3. Install Turck MMCache for PHP
Description: “Turck MMCache is a free open source PHP accelerator, optimizer, encoder and dynamic content cache for PHP. It increases performance of PHP scripts by caching them in compiled state, so that the overhead of compiling is almost completely eliminated. Also it uses some optimizations to speed up execution of PHP scripts. Turck MMCache typically reduces server load and increases the speed of your PHP code by 1-10 times. ”
Turck MMCache requires: apache 1.3, mod_php 4.1, autoconf, automake, libtool, m4. You should already have most of these on your server if not use the “apt-get install <dependency here>” command to get them installed. I won’t go into detail about this here, you should easily be able to search the net to get them installed.
To install Turck MMCache, perform the following commands via SSH:
wget http://aleron.dl.sourceforge.net/sou…e-2.4.6.tar.gz
export PHP_PREFIX=”/usr”
$PHP_PREFIX/bin/phpize
./configure –enable-mmcache=shared –with-php-config=$PHP_PREFIX/bin/php-config
(You must specify the real prefix where PHP is installed in the “export” command. It may be “/usr” “/usr/local”, or something else.)
make
make install
Turck MMCache can be installed both as Zend or PHP extension, so you need to edit your php.ini file (usually /etc/php.ini).
To install as Zend extension:
zend_extension=”/usr/lib/php4/mmcache.so”
mmcache.shm_size=”16″
mmcache.cache_dir=”/tmp/mmcache”
mmcache.enable=”1″
mmcache.optimizer=”1″
mmcache.check_mtime=”1″
mmcache.debug=”0″
mmcache.filter=””
mmcache.shm_max=”0″
mmcache.shm_ttl=”0″
mmcache.shm_prune_period=”0″
mmcache.shm_only=”0″
mmcache.compress=”1″
To install as PHP extension:
extension=”mmcache.so”
mmcache.shm_size=”16″
mmcache.cache_dir=”/tmp/mmcache”
mmcache.enable=”1″
mmcache.optimizer=”1″
mmcache.check_mtime=”1″
mmcache.debug=”0″
mmcache.filter=””
mmcache.shm_max=”0″
mmcache.shm_ttl=”0″
mmcache.shm_prune_period=”0″
mmcache.shm_only=”0″
mmcache.compress=”1″
You may need to copy the mmcache.so file to the directory specified to the above paths in the configuration entries.
Create the cache directory:
mkdir /tmp/mmcache
chmod 0777 /tmp/mmcache
Restart Apache with:
service httpd restart
OR
/etc/rc.d/init.d/httpd restart
4. Tuning sysctl.conf
The sysctl.conf of a server is something that is seldom optimized for performance. You can get a tremendous boost in throughput by adjusting these settings. This configuration has been written by Steve from Rack911. I have applied this configuration to servers ranging from Celeron 1.7Ghz to Dual Xeon 2.8Ghz servers, and on the whole, the load on each lowered after making the changes.
First make a backup of your old /etc/sysctl.conf file by running the following command, logged in as root:
cp /etc/sysctl.conf /etc/sysctl.conf.bak
Now enter:
pico /etc/sysctl.conf
and replace the contents of the file with the following:
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Disables packet forwarding
net.ipv4.ip_forward=0
# Disables IP source routing
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.lo.accept_source_route = 0
net.ipv4.conf.eth0.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
# Enable IP spoofing protection, turn on source route verification
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
# Disable ICMP Redirect Acceptance
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.lo.accept_redirects = 0
net.ipv4.conf.eth0.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
# Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.eth0.log_martians = 0
# Disables IP source routing
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.lo.accept_source_route = 0
net.ipv4.conf.eth0.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
# Enable IP spoofing protection, turn on source route verification
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
# Disable ICMP Redirect Acceptance
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.lo.accept_redirects = 0
net.ipv4.conf.eth0.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
# Disables the magic-sysrq key
kernel.sysrq = 0
# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 15
# Decrease the time default value for tcp_keepalive_time connection
net.ipv4.tcp_keepalive_time = 1800
# Turn off the tcp_window_scaling
net.ipv4.tcp_window_scaling = 0
# Turn off the tcp_sack
net.ipv4.tcp_sack = 0
# Turn off the tcp_timestamps
net.ipv4.tcp_timestamps = 0
# Enable TCP SYN Cookie Protection
net.ipv4.tcp_syncookies = 1
# Enable ignoring broadcasts request
net.ipv4.icmp_echo_ignore_broadcasts = 1
# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1
# Log Spoofed Packets, Source Routed Packets, Redirect Packets
net.ipv4.conf.all.log_martians = 1
# Increases the size of the socket queue (effectively, q0).
net.ipv4.tcp_max_syn_backlog = 1024
# Increase the tcp-time-wait buckets pool size
net.ipv4.tcp_max_tw_buckets = 1440000
# Allowed local port range
net.ipv4.ip_local_port_range = 16384 65536
CTRL + X to exit and save the file
To make your changes take effect immediately, type this command:
/sbin/sysctl -p

Exit mobile version